Brand: ABB
Category: Other
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for TEIP11, TEIP11-PS
Uploaded: April 20, 2026, 7:43 p.m.
Warranty Information
Warranty provisions are void if the device is used improperly, disregarded, or altered.
The TEIP11 and TEIP11-PS I/P signal converters convert standard electrical signals (e.g., 4 to 20 mA) into pneumatic output signals (e.g., 0.2 to 1 bar). They act as a link between electrical/electronic and pneumatic systems, controlling pneumatic actuators or positioners for valve positioning. The device uses a force balance method for signal conversion and is known for its stability under shock and vibration. It requires compressed air for its power supply. Adjustment of zero point and range is possible via two screws. Available in various housing designs for different mounting requirements, including those for potentially explosive atmospheres.
Troubleshooting and error codes
| Issue | Possible Cause | Remedy |
|---|---|---|
| Device not operating | No power supply | Check power supply connection. |
| Incorrect output signal | Incorrect zero point or range adjustment | Adjust zero point and range using adjustment screws. |
| Device malfunctioning in explosive atmosphere | Incorrect type of protection used or improper installation | Refer to 'Use in potentially explosive atmospheres' section and ensure compliance with all safety instructions. |