Brand: ABB
Category: Power Supplies
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for CP-E 5/3.0
Uploaded: Nov. 21, 2025, 6:42 p.m.
Warranty Information
ABB products are subject to change. Refer to documentation for specific details.
Operating and installation instructions
Primary switch mode power supplies CP-E range
- Safety First: Always disconnect the system from the supply network before installation, maintenance, or modification. Ensure the unit is installed by qualified persons in accordance with national regulations.
- Installation: Fasten the DIN rail, snap the unit onto the rail, and ensure correct cable dimensions and connections.
- Operation: The green LED "OK" indicates output voltage is >90%, while the red LED "LOW" indicates 75-90%. Use the "OUTPUT Adjust" potentiometer to set the output voltage.
- Derating: Note the derating of output current based on ambient temperature as shown in Fig. 5.
- Warnings: Be aware of high voltage, stored energy, and potential burn risks. Do not open the unit or introduce objects.