Manual for Digital Camera 300

Manual for Digital Camera 300

Brand: acer

Category: Digital Camera

Document Type:

Language: EN

Uploaded: Aug. 9, 2025, 11:45 p.m.

Taking Pictures:

  1. Turn on the camera using the POWER button.
  2. Look through the viewfinder to frame your shot.
  3. Press the shutter button. Wait for the BUSY indicator to turn off.

Using as a PC Camera:

  1. Connect the camera to your PC via USB cable.
  2. Launch the "Acer Digital Camera 300 App" or right-click the icon and select "PC Camera".
  3. Click "Snapshot" to capture images or "Rotate" to adjust video orientation.

Recording Video:

  1. Ensure Presto! VideoWorks is installed.
  2. Connect camera via USB and launch Presto! VideoWorks.
  3. Select "Capture Video" then "Select Image Source" and choose your camera.
  4. Configure frame rate and capture time limit, then click OK to start recording.

Troubleshooting and error codes

Problem Solution
The LCD panel remains blank when I press the POWER button and can't take pictures. Check that the battery is correctly inserted. If it is old, replace it.
The camera can not take a picture. When the FLASH indicator is on, it takes up about 15 seconds to charge the flash light for the next shot. During this time the camera is busy and cannot take pictures. Wait until the indicator becomes OFF.
Cannot download all my images from my camera to PC. The RAM memory installed in your computer may not have sufficient storage space. Close all software programs and proceed to download your images. If the problem persists, download images in batches and store each batch in your hard drive before proceeding to the next batch. Make sure all the images you want are stored prior to clearing the camera memory.
I have connected the camera to the computer, but the Digital Camera 300 driver says "Device not ready!”. Make sure that the batteries are installed correctly and there is enough power in them. Check if the camera power is turned on. If not, turn it on and then connect the camera to the computer again.
In Windows 2000, when I unplug the camera from my computer while running Acer Dgitial Camera 300 driver, the computer freezes. Unplugging the camera from your computer while running the Digital Camera 300 driver will cause the computer to become unstable. Do not unplug the camera from your computer when the camera or driver is in use.
Privacy Policy