Manual for EWA33xx

Manual for EWA33xx

Brand: AEG

Category: Appliances

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8:01 p.m.

Manual Publish Date: 2017-06-05

Warranty Information

Information on warranty is not explicitly stated in this document.

GETTING STARTED
  1. Before first use, wipe the inside and outside of the kettle with a damp cloth.
  2. Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket. Redundant cord can be wound into the bottom of base unit.
  3. Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level indicator, but not exceeding the Max. mark.
  4. Close the lid and make sure it snaps in correctly. Otherwise the auto switch off function will not work reliably. Place the kettle onto the base. Press down the ON/OFF switch; the indicator light will illuminate and the kettle will start to heat up.
  5. The automatic switch off function. When the water has boiled or the kettle is moved from the base, it will switch off automatically. If you wish to stop the heating process before the water is boiling, simply lift up the ON/OFF switch to the OFF position.
CLEANING AND CARE
  1. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.
  2. To clean the mesh filter, grab the strainer insert and lift out. Cleaning the heating plate - superficial spots of rust may appear on the base unit. Remove with a stainless steel cleaning agent.
  3. Decalcifying is recommended regularly, depending on water hardness. Fill the kettle with water and decalcifier according to decalcifier product instructions. Do not boil the solution as it may foam over. Afterwards, rinse kettle thorougly with fresh water.

Troubleshooting and error codes

PROBLEM POSSIBLE CAUSE SOLUTION
The appliance switches off before boiling. Too much lime scale at the base of the kettle. Run the decalcifying procedure.
The appliance does not switch off. - Close lid until it locks
Insert the strainer correctly.
The appliance cannot be switched on. After operating with little or no water, the appliance has not cooled down suffiently. Allow to cool a short time and try again.
Privacy Policy