Manual for DVD 4516 TFT

Manual for DVD 4516 TFT

Brand: AEG

Category: Audio Equipment

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 8:09 p.m.

Manual Publish Date: 2006-05-03

Warranty Information

The device is covered by a 24-month guarantee starting from the date of purchase.

Getting Started

  • Powering On: Press the POWER ON/OFF button on the side of the device.
  • Loading Media: Open the CD/DVD tray using the OPEN button, insert your disc, and close the tray.
  • Playback: Press the PLAY button to start playback.
  • Navigation: Use the arrow keys on the remote to navigate menus and select options.
  • Volume: Adjust volume using the VOLUME +/- buttons on the remote or device.
  • Settings: Access the SETUP menu to configure various options like TV system, language, and audio settings.
  • File Mode: Use the 'Working in file mode' section to browse and play files from CDs, DVDs, or USB/memory cards.

Key Features

  • Supports various media formats (DVD, CD, MP3).
  • Offers features like subtitle selection, audio language change, zoom, and angle selection.
  • Includes a troubleshooting guide for common issues.
  • Remote control operation for convenient use.

Troubleshooting and error codes

Fault Possible cause Solution
The power supply light does not light No power supply WARNING: Before searching for the fault, please turn the device off. During battery operation: check whether the battery has clicked into place. During mains adapter operation: Put the mains plug in correctly, if necessary, check the socket is working with another appliance.
No image displayed on screen no power supply/ mains switch switched off Switch the player on by the mains switch (Fig. 1/1).
During operation with a television set: Video cable not correctly connected WARNING: Before searching for the fault, please turn the device off. Check the correct fit of the Video cable → Page 50, "Connection to Other Equipment". Make sure that the jacks are tightly in the sockets.
TFT screen is switched off Press the TFT ON/OFF (Fig. 2/1) button on the remote control.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible Use only compatible media (see → Page 40, "Technical data").
No response when pressing button DVD/CD incorrectly placed in CD/DVD-tray Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around → Page 52, "Handling CD/DVD".
CD/DVD is damaged Use a different CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child protection system is activated Deactivate the child protection → Page 62, "Child protection".
Power supply problem or static charging of appliance Switch off the main switch and pull out the mains plug. Insert the mains plug into the socket and switch the player on again.
No sound During operation with a television set: Audio cable not connected WARNING: Before searching for the fault, please turn the device off. Check the correct fit of the Audio cable→ Page 50, "Connection to Other Equipment". Make sure that the jacks are tightly in the sockets.
Amplifier switched off If you use an amplifier for Audio output: check whether the amplifier is switched on.
Volume turned to low Press the VOLUME + button on the remote control or keep the VOL+ button on the device pressed down for approximately 3 seconds.
Headphones not correctly inserted Check that the headphones are correctly positioned → Page 51, "Use of ear/headphones".
Incorrect settings Check the settings of your DVD-Player.
The remote control does not work wrong direction The remote control is not pointed towards the DVD-Player.
too far away Make sure that the remote control is not further than 5 m away from the player.
Batterie empty Replace the batteries in the remote control → Page 47, "Remote control battery installation".
Titles are played in wrong order Playlist is used Delete the playlist → Page 57, "Deleting a Playlist".
DVD cannot be played DVD has not been finalized Use a finalized DVD.
Privacy Policy