Manual for DVD 4525 USB/CR

Manual for DVD 4525 USB/CR

Brand: AEG

Category: Audio Equipment

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8 p.m.

Manual Publish Date: 2007-04-24

Warranty Information

The device is covered by a 24-month guarantee starting from the date of purchase.

Basic Operation

This manual describes the operation of the AEG DVD 4525 USB/CR DVD player. It covers:

  • Device Parts and Remote Control: Identification of buttons and connections.
  • Setup and Connection: Installing the device and connecting it to a TV and audio system.
  • Media Playback: Playing DVDs, CDs, MP3s, and viewing photos. Includes functions like play, pause, stop, chapter/track selection, subtitle and audio language selection, zooming, and adjusting volume.
  • File Mode: Navigating and playing files from discs, creating playlists, and ripping audio from CDs to MP3 format.
  • Settings: Configuring display settings, audio output, parental controls, and default settings.
  • Troubleshooting: Common issues and their solutions.
  • Disposal, Guarantee, and Declaration of Conformity.

Troubleshooting and error codes

Fault Possible cause Solution
The power supply light does not light No power supply WARNING: Before troubleshooting, switch the player off. Put the mains plug in correctly, if necessary, check the socket is working with another appliance.
No image displayed on screen no power supply/mains switch switched off Switch the player on by the mains switch (Fig. 1/1).
Video cable not correctly connected WARNING: Before troubleshooting, switch the player off. Check the correct fit of the Video cable „Connecting the Video cable“. Make sure that the jacks are tightly in the sockets.
No response when pressing button no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible Use only compatible media (see „Technical data“).
DVD/CD incorrectly placed in CD/DVD-tray Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around ⇨ „Handling CD/DVD“.
CD/DVD is damaged Use a different CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child lock system is activated Deactivate the child lock „Parental“.
The wrong TV mode has been selected (no P-SCAN-capable playback device). Press the V-MODE button (Fig. 3/18) to change the TV mode (Only possible in stop mode).
No sound Power supply problem or static charging of appliance Switch off the main switch and pull out the mains plug. Insert the mains plug into the socket and switch the player on again.
Audio cable not connected WARNING: Before troubleshooting, switch the player off. Video plug for transmission of the Video signal, you must use and Audio cable in addition to the Video cable ⇨ „Connecting the Audio cable“.
Amplifier switched off If you use an amplifier for Audio output: check whether the amplifier is switched on.
Incorrect settings Check the settings of your DVD-Player.
Volume on the DVD player turned down. Increase the volume by pressing the VOL+ key (Fig. 3/28).
No voice playback via Scart in the case of DVDs with AC3 sound Incorrect loudspeaker settings Check the loudspeaker settings. Make the following adjust- ments in the Audio Setup menu: Front loudspeakers = large Center loudspeaker = none Surround loudspeakers = none
The remote control does not work wrong direction The remote control is not pointed towards the DVD-Player.
too far away Make sure that the remote control is not further than 7 m away from the player.
Batteries empty Replace the batteries in the remote control → „Remote control battery installation“.
DVD cannot be played DVD has not been finalized Use a finalized DVD.
Privacy Policy