Brand: AEG
Category: Audio Equipment
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for EC 4844
Uploaded: April 20, 2026, 7:58 p.m.
Warranty Information
This appliance comes with a 24-month warranty from the date of purchase.
Basic Operation
Power On/Off: Press the POWER button.
Source Selection: Press the SOURCE button to cycle through Bluetooth, AUX, and USB modes.
Volume Control: Use the VOLUME + / - dials.
Treble/Bass Control: Use the TREBLE + / - and BASS + / - dials.
Music Playback (USB/Bluetooth): Use the Play/Pause (►II) button and skip track (◄◄/►►►) buttons.
Bluetooth Pairing: Press and hold the ►II/PAIR button to activate pairing mode.
Microphone Use: Connect the microphone and turn it on using the ON/OFF switch.
Troubleshooting and error codes
| Error | Remedy |
|---|---|
| The appliance does not switch on. | 1. Check if the battery is charged. 2. The appliance may malfunction when used in areas with strong radio interference. The appliance will work properly again once there is no more interference. |
| No sound. | 1. Turn on the sound as it may be muted. 2. Increase the volume. |
| The AUX-in audio playback is not working. | 1. Check if the AUX cable is connected properly. 2. Turn on the sound as it may be muted. 3. Increase the volume. |
| The USB audio playback is not working. | 1. Check if the USB cable is connected properly. 2. Turn on the sound as it may be muted. 3. Increase the volume. |
| The Bluetooth audio playback is not working. | 1. Check if there is a proper Bluetooth connection established. If not, establish a new connecting by pairing both the appliances. 2. Turn on the sound as it may be muted. 3. Increase the volume. |
| Electro-Magnetic Interference. | 1. The normal functioning of the appliance may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the appliance to resume normal operation by following the instruction manual. In case the function could not resume, please use the appliance in a different location. |
| System freezes suddenly. | 1. Disconnect the power supply for 5 seconds, then switch the device on again. |