Brand: AEG
Category: Audio Equipment
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for MC 4433 CD
Uploaded: Nov. 21, 2025, 9:07 p.m.
Manual Publish Date: 2008-03-01
Warranty Information
24-month warranty for consumers and 12-month warranty for commercial use for private users.
Basic Operation:
- Power: Press the / button to switch between standby mode (time display) and on.
- Volume: Use the A/V Volume buttons (14/7) to adjust the sound level.
- Headphones: Connect 3.5mm stereo headphones to the headphone jack (13); speakers will be deactivated.
- USB: Connect a USB storage device, select USB mode with the FUNCTION button, and press II to play music.
- AUX IN: Connect external analog devices and play through the speakers. Select AUX mode with the FUNCTION button.
- Radio: Select FM or MW mode using the FUNCTION button. Tune stations with the TUNING dial (9).
- CD/MP3 Playback: Select CD mode with FUNCTION, open the CD compartment, insert a CD, and press II to play. Use playback controls like play/pause (II), track skip (►►◄), repeat (REP/RAN), and folder navigation (FOLDER UP/FOLDER).
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers | Speakers not connected properly | Check speaker connections. |
| CD not playing | CD inserted incorrectly or not present | Ensure CD is inserted correctly; check for presence of CD. |
| USB device not recognized | Incompatible USB device or cable | Try a different USB device. Do not use USB extension cables. Ensure direct connection to the unit. |
| Poor radio reception | Antenna position or signal strength | Adjust antenna position or length. Switch to MONO mode if reception is weak. |