Manual for MRC 4141 P

Device Operation Summary

Powering On/Off: Press the power button (5) to turn the device on or off.

Volume Control: Adjust the volume using the volume up (7) and down (8) buttons.

Display Brightness: Use the SNOOZE/SLEEP/DIMMER button (1) to adjust the display brightness.

Display Backlight: To turn off the display backlight, press and hold button (8) in standby mode for approx. 3 seconds. To turn it back on, press any button to illuminate for 15 seconds, then press and hold button (8) again for 3 seconds.

Display Information: In standby mode, repeatedly press button (10) to cycle through Year, Date, Temperature, and Humidity.

Automatic Display Toggle: In standby mode, press and hold button (7) until "07" appears. Press and hold again to turn off (display "OFF").

Temperature Units: In standby, press button (10) repeatedly until temperature is shown. Then, press and hold button (10) for 3 seconds to switch between °C and °F.

Weather Display: Place the device near an open window for weather forecasts (Soggy, Partly Cloudy, Cloudy, Rainy).

Setting Time: In standby, press and hold button (6) until the year blinks. Use buttons (9) and (10) to set Year, Month, Day, 12/24hr format, Hour, and Minute. Confirm each setting with button (6).

Daylight Saving Time: Press and hold button (9) to switch between summer and standard time.

Radio Tuning: Use buttons (9) and (10) to tune to stations. Holding a button initiates an automatic search.

Storing Stations: Tune to a station, then press and hold button (6). Select a memory slot using buttons (9) and (10), then press button (6) to save.

Selecting Stored Stations: Repeatedly press button (6) in radio mode.

Setting Alarms: Press button (12) for Alarm 1 or button (11) for Alarm 2. Press and hold the alarm button for 3 seconds. Set hours and minutes using buttons (9) and (10), confirming with the alarm button. Select days for the alarm (Mon-Fri, Mon-Sun, Sat-Sun, Weekday).

Alarm Options: Choose between a sound signal or waking up to the radio. For radio alarms, set maximum volume.

Disabling Alarms: In standby, press and hold the alarm button (12 or 11).

Snooze Function: Press the SNOOZE/SLEEP/DIMMER button (1) to snooze for approx. 9 minutes.

Delayed Shut-off: In radio mode, press SNOOZE/SLEEP/DIMMER (1) repeatedly to select a shut-off time (90, 60, 30, 15 minutes or OFF).

Short-term Timer: In standby, press NAP/M+/MEM (6) repeatedly to set a timer (90 to 10 minutes or OFF). A beeping signal will sound.

Projection: Press ON/OFF/PROJECTION (17) to turn projection on/off. Adjust focus with the dial on the projector (16). Use the 180° FLIP button (18) to rotate the image.