Manual for SR 4371 BT

Manual for SR 4371 BT

Brand: AEG

Category: Audio Equipment

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:42 p.m.

Warranty Information

24 months warranty according to the warranty declaration.

The device can play music from CDs, MP3s, and USB drives. It also functions as a radio and can connect to other devices via Bluetooth. Basic operations include turning the device on/off, adjusting volume, and selecting different functions like CD, Radio, or Bluetooth. For CD/MP3 playback, you can play, pause, skip tracks, and program playback order. Bluetooth allows for wireless audio streaming after pairing. USB playback is also supported. The device has a standby mode and can be reset to factory settings.

Troubleshooting and error codes

Symptom Cause Solution
CD cannot be played CD is not inserted or inserted incorrectly. Ensure the disc is inserted with the label facing up.
Batteries too weak. Insert new batteries or operate the device with the mains cable.
CD skips during playback. The CD is dirty or scratched. Clean the CD with a soft cloth, starting from the center.
Device cannot be operated. Device is blocked and "hanging". Disconnect the power for approx. 5 seconds. Then switch the device back on.
No audio signal during Bluetooth connection. Device is not registered with the audio source. Check if the connection is established. Re-register the device with the audio source if necessary.
Volume too low. Increase the volume on the device. Increase the volume on the audio source.
Device cannot be connected. The device is not registered with the audio source. Ensure there is a connection. Re-register the device with the audio source if necessary.
Audio source is switched off. Switch on the audio source.
Bluetooth is switched off on the audio source. Switch on the Bluetooth function on the audio source.
Bluetooth version is not supported. Use a different playback device.
Privacy Policy