Brand: AEG
Category: Cooktop
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: April 20, 2026, 7:51 p.m.
Refer to the warranty booklet for information on the warranty period and authorized service centers.
Press and hold the power button (①) to turn the hob on or off. Control bars appear when activated.
Use the control bar (0-9 or P) to set the desired heat level for each cooking zone. Press '0' to deactivate a zone.
Place cookware centrally on the selected zone. The hob automatically detects its size and shape.
Clean the hob after each use with a moist cloth and neutral detergent. Remove spills immediately.
| Problem | Possible cause | Remedy |
|---|---|---|
| Cannot activate or operate the hob. | Hob not connected to electrical supply or incorrectly connected. | Check electrical connection. |
| The fuse is blown. | Fuse blown. | Check fuse; if it blows repeatedly, contact a qualified electrician. |
| Cannot select maximum heat setting for a zone. | Other zones consume maximum available power. | Reduce heat setting of other zones on the same phase. Refer to "Power management". |
| An acoustic signal sounds and the hob deactivates. | Something placed on control panel. | Remove object from control panel. |
| Hob²Hood not working. | Signal blocked (e.g., by tall pot, hand). | Ensure clear signal path. Use compatible cookware. |
| Sensors get hot. | Cookware too large or too close to controls. | Use smaller cookware or move cookware away from controls. |