Brand: AEG
Category: Heating
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for BMT 60
Uploaded: April 20, 2026, 7:59 p.m.
Warranty Information
Refer to country-specific terms and conditions for warranty details.
General Information: This water heater must be installed, commissioned, and serviced by approved technicians.
Operation: The unit heats water instantaneously as it flows through. Adjust temperature using the knob. The LED indicates when the unit is ON.
Installation: Install close to hot water draw-off points, with minimum clearance for servicing. Mount securely to the wall. Plumbing and electrical work must comply with local codes. Ensure proper grounding.
Maintenance: Clean the housing with a damp cloth. Periodic removal of scale from aerators is recommended. Maintenance work by qualified technicians only.
Safety: High water temperatures are possible; keep children away. Failure to ground the unit can result in serious injury or death.
Operation: The unit heats water instantaneously as it flows through. Adjust temperature using the knob. The LED indicates when the unit is ON.
Installation: Install close to hot water draw-off points, with minimum clearance for servicing. Mount securely to the wall. Plumbing and electrical work must comply with local codes. Ensure proper grounding.
Maintenance: Clean the housing with a damp cloth. Periodic removal of scale from aerators is recommended. Maintenance work by qualified technicians only.
Safety: High water temperatures are possible; keep children away. Failure to ground the unit can result in serious injury or death.
Troubleshooting and error codes
| Fault | Cause | Rectification |
|---|---|---|
| No hot water | - Circuit breaker off - Safety thermal cut-out tripped |
- Turn circuit breaker on - Reset thermal cut-out |
| Water not hot enough | - Water flow too high - Voltage too low |
- Reduce water flow rate - Supply correct voltage to unit |