Brand: AEG
Category: Heating
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for KLE 502 / KLE 1002
Uploaded: Nov. 21, 2025, 6:01 p.m.
Warranty Information
The warranty covers manufacturing and material defects for 24 months for domestic use and 12 months for commercial use.
AEG KLE 502 / KLE 1002 Operation Summary
This manual details the operation of the AEG KLE 502 and KLE 1002 convector heaters. Key functions include:
- Modes: Comfort, Setback, Programmed Operation, and Frost Protection.
- Controls: A sliding switch selects operating modes or powers the unit off. A temperature control knob (10-30 °C) sets the desired room temperature. A heating indicator shows when the unit is active.
- Comfort Mode: The unit maintains a set temperature, automatically switching on and off.
- Setback Mode: Reduces the temperature by approximately 3.5 °C for longer absences.
- Frost Protection: Activates the heater if the room temperature drops below 7 °C.
- Safety: Features include a high-limit safety cut-out and warnings against covering the appliance or placing objects near it.
- Child Safety: Specific instructions are provided for children of different age groups regarding supervision and safe operation.
Troubleshooting and error codes
| Problem | Cause | Remedy |
|---|---|---|
| The appliance does not heat up. | The temperature is set too low. | Check the temperature set on the appliance. |
| The power supply has been interrupted. | Check the MCB/fuse in your fuse box/distribution panel. | |
| The appliance has overheated. The high limit safety cut-out has switched the appliance off. | Remedy the cause, such as a covered or dirty air outlet or intake. After a few minutes of cooling down, the appliance will restart. |