Brand: AEG
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for 17166GT-MN
Uploaded: April 20, 2026, 7:46 p.m.
Warranty Information
Contact your dealer or an Authorised Service Centre if you cannot find a solution to the problem yourself.
Hob - Daily Use: Always light the burner before putting cookware on it. Turn the knob to ignite and push down. Keep pressed for 10 seconds to warm up the thermocouple. Adjust flame. Turn knob to '0' to switch off.
Oven - Daily Use: Open oven door. Push and turn knob for top oven to ignite top oven burner. Push and turn knob for top oven clockwise to ignite grill. Push and turn knob for main oven counterclockwise to ignite main oven. Keep knob pushed for 15 seconds. Close door and set heat setting.
Clock Functions: Use buttons to set time, minute minder, or clock. Press CLOCK to set a clock function, PLUS/MINUS to set time.
Care and Cleaning: Clean appliance interior after each use. Clean hob after each use. Use soft cloth and neutral detergent. Stainless steel and aluminium appliances should be cleaned with a wet sponge.
Troubleshooting and error codes
| Problem | Possible cause | Remedy |
|---|---|---|
| You cannot activate the appliance. | The appliance is not connected to an electrical supply or it is connected incorrectly. | Check if the appliance is correctly connected to the electrical supply. |
| You cannot activate the appliance. | The fuse is released. | Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. |
| You cannot activate the appliance. | The appliance is too hot. | Wait for the appliance to cool down. |
| The burners do not work. | There is no gas supply. | Check the gas connection. |
| There is no spark when you try to activate the spark generator. | Burner cap and crown are placed incorrectly. | Place the burner cap and crown correctly. |
| The flame extinguishes immediately after ignition. | Thermocouple is not heated up sufficiently. | After lighting the flame, keep the knob pushed for equal or less than 10 seconds. |
| The flame ring is uneven. | Burner crown is blocked with food residues. | Make sure that the injector is not blocked and the burner crown is clean. |
| The flame colour is orange or yellow. | - | The flame can look orange or yellow in some areas of the burner. This is normal. |
| The oven does not heat up. | The oven is deactivated. | Activate the oven. |
| The oven does not heat up. | The clock is not set. | Set the clock. |
| The oven does not heat up. | The necessary settings are not set. | Make sure that the settings are correct. |
| The lamp does not operate. | The lamp is defective. | Replace the lamp. |
| It takes too long to cook the dishes or they cook too quickly. | The temperature is too low or too high. | Adjust the temperature if necessary. Follow the advice in the user manual. |
| Steam and condensation settle on the food and in the cavity of the oven. | You left the dish in the oven for too long. | Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends. |
| The appliance makes noises. | - | Some metal parts of the appliance expand and contract when they heat up or cool down. The noises are normal. |
| The display shows "12.00". | There was a power cut. | Reset the clock. |