Switching the machine on and off

Switching on: Press On-/off switch

Switching off: Release On-/off switch

Switching on: Press the On-/off switch and then the locking button, after that release on-off switch.

Switching off: Press the On-/off switch and then release.

Always hold machine firmly with both hand prior to switching on. Only switch on in raised position.

Advice for operation

When sanding, guide the machine without applying special pressure. The weight of the machine itself is quite sufficient for good sanding results.

When sanding wood, the dust bag should be used.

When suction performance becomes less effective empty dust bag.

If large quantities of dust are being produced, a hose-pipe can be connected to the dustbag connector.

When sanding metal the dust suction facility should not be used, because of the risk of fire from flying sparks.