Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for BE 600 R
Uploaded: April 20, 2026, 7:53 p.m.
Warranty Information
AEG warrants this product against defects in materials and workmanship for 24 months from the date of purchase.
Starting and Stopping: To start the tool, press the trigger switch. To stop, release the trigger switch.
Variable Speed Control: The speed can be adjusted by varying the pressure on the trigger switch. A slower speed is indicated by a turtle icon, and a faster speed by a rabbit icon.
Forward/Reverse Rotation: Use the switch to select the direction of rotation. The center position locks the switch.
Drilling and Screwdriving Modes: The tool can be used for drilling, percussion drilling, screwdriving, and thread cutting. Refer to the manual for specific settings for different materials.
Changing Accessories: Ensure the tool is unplugged before changing bits or accessories. Open the chuck, insert the accessory, and tighten the chuck securely.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Power supply issue | Check power connection and ensure the tool is plugged in. |
| Trigger switch not engaged | Ensure the trigger switch is pressed. | |
| Reduced power output | Motor overheating | Allow the tool to cool down. |
| Worn brushes | Contact an authorized service agent. | |
| Excessive vibration | Accessory not properly seated | Ensure the bit or accessory is securely tightened in the chuck. |
| Damaged accessory | Replace the accessory. |