Manual for BL18C2

Manual for BL18C2

Brand: AEG

Category: Power Tools

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8:11 p.m.

Warranty Information

For warranty information, please consult your local retailer or service centre.

OPERATION

CHARGING THE BATTERY PACK

  • Battery packs are shipped in a low charge condition. Therefore, you should charge them before first use. If the charger does not charge the battery pack under normal circumstances, bring both the battery pack and charger to an authorised service centre.
  • Make sure that the power supply is normal household voltage, 220-240V, 50/60Hz, AC only.

CHARGING A COOL BATTERY PACK

  1. Insert the battery pack into the charging port.
  2. Connect the product to a power supply.
  3. Disconnect the product from the power supply when the battery pack becomes fully charged.
  4. Remove the battery pack from the product.

CHARGING A HOT BATTERY PACK

When using a tool continuously, the cells in the battery pack become hot. A hot battery pack should be allowed to cool down for approximately 30 minutes before recharging.

Troubleshooting and error codes

LED INDICATOR
Continuous orange Battery is being evaluated.
Flashing orange Battery is too hot or cold. Charging will begin when battery reaches correct charging temperature.
Flashing green Battery is being charged.
Continuous green Charging is complete.
Continuous red ! Battery or charger is defective.
Privacy Policy