Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for BSS18OP
Uploaded: April 20, 2026, 8:12 p.m.
Manual Publish Date: 2017-09-25
Warranty Information
Refer to the manual for warranty information and service addresses.
- Remove the battery pack before starting any work on the machine.
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak.
- Check with forwarding company for further advice.
- Always wear safety glasses when working with the machine.
- Use protective clothing such as dust mask, protective gloves, sturdy non-slip footwear, helmet and ear defenders.
- Do not inhale the dust. Wear a suitable dust protection mask.
- Do not machine any materials that present a danger to health (e.g. asbestos).
- Switch the device off immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force.
- Determine why the insertion tool stalled and rectify this, paying heed to the safety instructions.
Troubleshooting and error codes
| Possible Causes |
|---|
| • it is tilted in the workpiece to be machined |
| • the power tool is overloaded |
| • when changing tools |
| • when setting the device down |