Manual for SB2E 720 RX SuperTorque

Manual for SB2E 720 RX SuperTorque

Brand: AEG

Category: Power Tools

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:52 p.m.

Warranty Information

Failure to follow warnings and instructions may result in electric shock, fire, and/or serious injury.

Operation Summary

This manual provides instructions for operating the AEG PowerTools SB2E 720 RX SuperTorque. Key operations include:

  • Drilling: Insert the drill bit into the chuck and tighten securely. Select the appropriate speed and drilling mode (normal or hammer). Apply steady pressure and guide the tool.
  • Screwdriving: Use appropriate screwdriver bits. Set the torque control and select the desired direction (forward/reverse). Engage the trigger to start and release to stop.
  • Hammer Drilling: Activate the hammer function for drilling into hard materials like concrete or masonry. Ensure the correct drill bits are used.
  • Accessory Insertion: Follow the illustrated steps to insert and secure drill bits and other accessories into the chuck.
  • Maintenance: Keep ventilation slots clean. Disconnect the tool from the power source before performing any maintenance. Refer to the manual for specific cleaning and maintenance procedures.
Privacy Policy