Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SE 3.6, LA 036
Uploaded: April 20, 2026, 8:12 p.m.
Warranty Information
Refer to the warranty list for specific details.
- Charging the Battery: Insert the battery pack into the charger. The yellow LED will light up, indicating charging. If the battery is too hot or too cold, charging will begin automatically once it reaches the correct temperature. A green LED indicates a full charge.
- Using the Tool: Ensure the battery is charged and inserted. Select the desired speed setting. Use the trigger to operate the tool.
- Inserting/Removing Accessories: Insert the accessory into the chuck and tighten it. To remove, loosen the chuck.
- Changing Direction of Rotation: Use the forward/reverse switch to change the direction of rotation.
- Safety Precautions: Always wear eye protection. Keep hands away from moving parts. Do not expose the tool to rain. Remove battery before maintenance.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not operate | Battery pack is not charged | Charge the battery pack |
| Battery pack not inserted correctly | Insert the battery pack correctly | |
| Machine is faulty | Contact an authorized service agent | |
| Battery not charging | Battery pack is not inserted correctly | Insert the battery pack correctly |
| Battery pack is faulty | Replace the battery pack | |
| Charger is faulty | Contact an authorized service agent | |
| LEDs flash simultaneously | Battery not fully inserted or fault in battery/charger | Ensure battery is correctly inserted. Contact authorized service agent if fault persists. |