Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for STEP100X
Uploaded: April 20, 2026, 8:03 p.m.
Warranty Information
Save all warnings and instructions for future reference. Contact service agents for replacements or exploded views.
Installing Saw Blades
- Unlock the FIXTEC holder by lifting the lever.
- Insert the saw blade into the holder until it stops.
- Lock the FIXTEC holder by pressing the lever down.
Changing Accessories
- Unlock the accessory holder.
- Remove the old accessory.
- Insert the new accessory and ensure it clicks into place.
Pendulum Action Adjustment
- Adjust the pendulum action using the dial (0 for no action, 3 for maximum action).
- Consult the manual for recommended settings based on material.
Electronic Speed Adjustment
- Use the electronic speed control to adjust the stroke rate.
- Refer to the manual for recommended speed settings for different materials.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Power cord not connected. | Check power connection. |
| Fuse blown. | Replace fuse. | |
| Tool stops during operation | Overload protection activated. | Switch off tool, let it cool down. Reduce cutting load. |
| Saw blade breaks | Incorrect blade for material. | Use correct saw blade. |
| Blade not inserted correctly. | Ensure blade is fully inserted and locked. | |
| Excessive vibration | Blade is dull or damaged. | Replace blade. |
| Blade is not straight. | Replace blade. | |
| Dust extraction not effective | Hose not connected properly. | Connect dust extraction hose securely. |
| Dust port blocked. | Clean dust port. |