Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Manual for WS 10-115, WS 10-125, WS 12-115, WS 12-125, WS 13-125 XE
Uploaded: April 20, 2026, 7:43 p.m.
Warranty Information
Contact an AEG service agent for any component replacements not described in the manual.
Switching on and off
To switch on the tool, press the "Start" button. To lock it on, press the "Lock" button. To switch off the tool, press the "Stop" button. To unlock it, press the "Unlock" button.
Using Accessories
Ensure accessories are correctly fitted. Threaded accessories must match the spindle thread. Flanged accessories must fit the flange diameter. Always use undamaged accessories and inspect them before each use. Ensure the rated speed of the accessory is at least equal to the maximum speed marked on the power tool.
Safety Precautions
Always wear safety goggles and gloves. Read all safety warnings and instructions carefully. Keep bystanders at a safe distance. Do not use accessories not recommended by the manufacturer. Avoid kickback by maintaining a firm grip and proper body positioning.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power failure | Check power supply |
| Excessive vibration | Damaged accessory; Improperly fitted accessory; Worn parts | Inspect and replace accessory; Ensure correct fitting; Contact service |
| Machine stops during operation | Overload | Reduce load or stop operation until cooled down |