Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for WS 12-125 MX, WSC 14-125 MX, WSE 14-125 MX
Uploaded: April 20, 2026, 8:02 p.m.
Manual Publish Date: 2012-09-09
Warranty Information
AEG provides a warranty for this power tool, with specific terms detailed in the accompanying documentation.
Basic Operation Summary
This manual provides instructions for the safe operation and maintenance of AEG Angle Grinders WS 12-125 MX, WSC 14-125 MX, and WSE 14-125 MX.
Key Operations:
- Safety First: Always read the manual, wear safety glasses, disconnect power before maintenance, and keep the work area clear.
- Grinding/Cutting: Ensure correct accessories are used and the guard is properly fitted.
- Switch Operation: Learn how to use the start/stop switch, noting that some models may not be lockable.
- Accessory Mounting: Follow instructions for securely attaching grinding discs, backing pads, and wire brushes.
- Maintenance: Keep ventilation slots clean and only use AEG approved parts.
Refer to specific sections for detailed instructions on handling, maintenance, and safety precautions to avoid electric shock, fire, and serious injury.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | No power | Check power supply and cord connection. |
| Excessive vibration | Damaged accessory / Imbalanced accessory / Machine malfunction | Inspect/replace accessory. Ensure proper mounting. Contact service. |
| Tool stops during operation | Overload / Overheating / Electronic overload protection | Allow tool to cool. Reduce load. If overload protection trips repeatedly, contact service. |
| Sparks excessively | Incorrect accessory / Worn grinding disc | Use correct accessory. Replace worn disc. |