Manual for WS 6-100, WS 6-115, WS 6-125

Starting and Stopping: Press the ON/OFF switch (9) to start the tool. Press the ON/OFF switch again to stop. Lock-on function: To lock the tool ON, slide the switch (9) forward and press it down (START/LOCK position 1 & 2). To unlock, press the switch (9) briefly. Using the Auxiliary Handle: Always use the auxiliary handle (12) for maximum control and safety during operation. Attach the handle to either side of the gearbox housing. Changing Accessories: Always disconnect the tool from the power supply before changing accessories. Use the spindle lock button (14) to prevent the spindle from rotating when tightening or loosening the flange nut (10, 15). Grinding/Cutting Operations: Ensure the protective guard is correctly fitted and adjusted. Wear appropriate personal protective equipment (PPE) at all times, including eye protection, hearing protection, and if necessary, respiratory protection. Observe proper posture and grip to maintain control. Keep bystanders at a safe distance. Ensure the workpiece is securely supported. Use only accessories specifically designed for this tool and intended for the application. Check accessories for damage before each use. Never remove guards or safety devices. Always use the correct type of guard for the accessory being used.