Manual for L7WC8632BI

Manual for L7WC8632BI

Brand: AEG

Category: Washer/Dryer

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 7:48 p.m.

Warranty Information

Refer to the product packaging or manufacturer's website for specific warranty details.

Appliance Operation Summary

This manual provides comprehensive instructions for operating your AEG Washer Dryer. Key operations include:

  • Preparation: Ensure proper installation, including water and electrical connections. Remove transit bolts before first use.
  • Loading: Do not exceed the maximum load of 8 kg. Sort laundry by fabric type and soiling level.
  • Programme Selection: Use the programme dial and touch buttons to select washing and drying cycles. Options like temperature, spin speed, and special modes (e.g., Time Save, Auto Dry) can be adjusted.
  • Detergent Use: Use the correct detergent compartment for powder or liquid detergents. Follow dosage recommendations.
  • Starting/Pausing: Use the Start/Pause button to begin or interrupt a cycle.
  • Drying: Select appropriate drying programmes based on fabric type and desired dryness level. Always check garment care labels.
  • Maintenance: Regular cleaning of the drum, detergent dispenser, and drain pump is recommended.
  • Troubleshooting: The manual includes a detailed troubleshooting section for common issues and error codes.

Troubleshooting and error codes

Problem Possible solution
The programme does not start.
  • Make sure that the mains plug is connected to the mains socket.
  • Make sure that the appliance door is closed.
  • Make sure that there is no damaged fuse in the fuse box.
  • Make sure that the Start/Pause has been touched.
  • If the delay start is set, cancel the setting or wait for the end of countdown.
  • Deactivate the Child Lock function if it is on.
  • Check the position of the knob on the selected programme.
The appliance does not fill with water properly.
  • Make sure that the water tap is open.
  • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
  • Make sure that the water tap is not clogged.
  • Make sure that the inlet hose has no kinks, damages or bends.
  • Make sure that the connection of the water inlet hose is correct.
  • Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to 'Care and cleaning'.
The appliance fills with water and drains immediately.
  • Make sure that the drain hose is in the correct position. The hose may be positioned too low. Refer to "Installation instruction".
  • Make sure that the sink spigot is not clogged.
  • Make sure that the drain hose has no kinks or bends.
  • Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".
  • Make sure that the connection of the drain hose is correct.
  • Set the drain programme if you set a programme without drain phase.
  • Set the drain programme if you set an option which ends with water in the tub.
The appliance does not drain the water.
  • Set the spin programme.
  • Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".
  • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems.
There is water on the floor.
  • Make sure that the couplings of the water hoses are tight and there is not water leakages.
  • Make sure that the water inlet hose and the drain hose have no damages.
  • Make sure you use the correct detergent and the correct quantity of it.
You cannot open the appliance door.
  • Make sure that a washing programme that ends with water in tub, has been selected.
  • Make sure that the washing programme is finished.
  • Set the drain or the spin programme if there is water in the drum.
  • Make sure that the appliance receives electrical power. This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre.
  • If you need to open the door, please read carefully "Emergency door opening".
The appliance makes an unusual noise and vibrates.
  • Make sure the levelling of the appliance is correct. Refer to "Installation instruction".
  • Make sure that the packaging and/or the transit bolts are removed. Refer to "Installation instruction".
  • Add more laundry in the drum. The load may be too small.
The programme duration increases or decreases during programme execution.
  • The AutoAdjust System is able to adjust the programme duration according to the type and the laundry load size. Refer to "The AutoAdjust System load detection" in "Daily Use" chapter.
The washing results are not satisfactory.
  • Increase the detergent quantity or use a different detergent.
  • Use special products to remove the stubborn stains before you wash the laundry.
  • Make sure that you set the correct temperature.
  • Decrease the laundry load.
Too much foam in the drum during the washing cycle.
  • Reduce the quantity of detergent.
After the washing cycle, there are some detergent residues in the dispenser drawer.
  • Make sure that the flap is in the correct position (UP for powder detergent - DOWN for liquid detergent).
  • Make sure you have used the detergent dispenser acccording the indications given in this user manual.
The appliance does not dry or does not dry correctly.
  • Turn the water tap on.
  • Make sure the drain filter is not clogged.
  • Reduce the laundry load.
  • Make sure you have set the correct cycle. If necessary, set again a short drying time.
The laundry is full of different colours fluff.
  • The fabrics washed in the previous cycle released fluff of a different colour:
  • The drying phase helps to eliminate some fluff.
  • Clean the clothes with a fluff remover.
  • In case of an excessive amount of fluff in the drum run the special programme to clean it (refer to "Fluff in the fabrics" for more details).
Privacy Policy