Brand: Agfa
Category: Camera
Document Type:
Language: EN
Manual for AGFAMATIC 100
Uploaded: Aug. 9, 2025, 11:36 p.m.
Warranty Information
No warranty information is available in this manual.
Loading the Film:
- Press the lock button and open the camera back.
- Insert the PAK cartridge and close the camera back.
- Operate the quick wind lever several times as far as it will go until number 1 appears in the window and the film advance is locked.
- Set the camera to 1/80 sec for sunny weather or 1/40 sec for overcast or shade.
- The viewfinder shows the correct picture area. Shooting range: 1.20m to infinity.
- Release shutter by pressing the red Sensor spot.
- Insert X flashcube firmly.
- Shutter speed for flash is automatically set to 1/40 sec.
- Flash range: 1.50 to 3m.
- When the bulb is burned, a red signal appears in the viewfinder.
- The flashcube turns automatically as the film is advanced.
- To remove the cartridge: operate quick wind lever until it locks, open camera back, and take out the cartridge.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Red signal in viewfinder | Flash bulb burned | Replace flash bulb. |