Brand: AgfaPhoto
Category: Camera
Document Type:
Language: EN
Manual for OPTIMA 1
Uploaded: Aug. 9, 2025, 11:36 p.m.
Manual Publish Date: 2009
Warranty Information
Contact the distributor or manufacturer for service, support, and warranty information.
- Getting Started: Install battery and memory card, charge battery, and power on the camera. Follow initial setup for language and date/time.
- Shooting Modes: Use Photo Record mode for still images and audio clips, Movie Record mode for videos.
- Using the LCD Monitor: Familiarize yourself with the Record and Playback mode screen layouts and icons for camera settings and status.
- Playback: View, zoom, and delete captured images, videos, and audio clips.
- Connections: Connect the camera to a TV, PC, or printer for various functions.
Troubleshooting and error codes
| Problem | Cause and/or Action |
|---|---|
| Camera does not turn on. | The batteries may be exhausted. Charge or replace the batteries. |
| Camera turns off automatically. | Press Power key to turn on the camera. |
| LCD turns dark. | Press any button except the Power button to turn on the LCD. |
| Empty battery icon is displayed on the LCD, then the camera turns off. | Batteries are exhausted, please replace or recharge. |
| LCD screen displays 'No image'. | The image file on the memory card. Image file format may not be supported. |
| LCD screen displays 'Not available for this file'. | Function is only available for specific file types. File format is not supported. |
| LCD screen displays 'Memory full'. | Memory card is full. Replace the memory card with a new one or delete unnecessary images. |
| LCD screen displays 'File locked' | This file is locked. Unlock the file. See “Protect" on page 63. |
| LCD screen displays 'Card locked'. | The memory card is protected. Remove the card and slide the write-protect switch to its unlock position. |
| LCD screen displays 'Format error'. | The card may be damaged. You can either change the card or wipe to clean the connected points. |
| No image displays on the TV screen | Incorrect TV-out type was selected. Set the correct TV-out type to match your TV system. |
| The lens got stuck up. | Do not force the lens to go back. The type of the battery used may be incorrect or the battery power level is too low. Change the battery or charge the battery before using the camera. |