Manual for DC-2030m

Manual for DC-2030m

Brand: AgfaPhoto

Category: Digital Camera

Document Type:

Language: EN

Uploaded: Aug. 9, 2025, 11:36 p.m.

Warranty Information

AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV.

Getting Started

This section contains information you should know before using this camera.

Basic Operation

This section explains all recording features of this camera.

Basic Recording

This section explains how to record still images, movies, and audio files.

Other Recording Functions

This section explains common operations about recording images.

Playback

This section explains playback, delete, and edit functions of still images, movies and audio files.

Making Connections

This section tells you how to connect this camera to a computer or TV.

Appendix

This section describes the troubleshooting and the camera specification.

Symbols Used:

Caution: Indicates cautions that should be read before using these functions. Tips: Indicates useful information when using this camera. Reference: Indicates the reference page.

Troubleshooting and error codes

Problem Cause Solution
Power does not turn on. Battery is inserted in the wrong direction. Reload battery in the correct direction.
Batteries are dead. Replace or recharge batteries.
The battery compartment door is open. Make sure the battery compartment door is securely closed.
The camera does not take pictures. The flash is charging. Wait for the flash to charge.
Memory is full. Insert a new memory card.
Memory card is not formatted correctly. The card may be defective, use a new card.
Image is not recorded when the shutter button is pressed. The Flash is charge. Wait for the flash to charge.
Memory is full. Insert a new memory card.
The flash does not fire. Flash is set to OFF. Set the flash to any mode except off.
Image is blurry or out of focus. The camera was moving when the image was captured. Hold the camera steady when shooting picture.
The subject was beyond the range within which the camera can focus. Turn the Macro mode on it the subject is within 10 cm or 40 cm. Do not use Macro mode when shooting distant subjects.
Image is not displayed on the LCD monitor. A memory card with non-DCIF images (recorded with other camera) is loaded. This camera cannot display non-DCIF images.
Recorded images are not saved in memory. The camera was turned off / powered down before the image was stored in memory. If the battery low indicator appears on the LCD monitor, replace the battery immediately.
Cannot transfer images to a computer after connecting the USB cable. USB driver is not installed. Install the USB driver before you connect the camera to a computer / turn the camera on.
Card error The memory card format may not be correct. Re-format the memory card to the FAT format using a card reader in Windows.
The lens got stuck up. The type of the battery used may be incorrect or the battery power level is too low. Do not force the lens to go back. Change the battery or charge the battery before using the camera.
Privacy Policy