Manual for LS340 VS340

Manual for LS340 VS340

Brand: Apricot

Category: Computer

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 8:57 p.m.

Manual Publish Date: 1996-01-01

Warranty Information

None

Unpacking

On unpacking the computer, you should find:
  • Apricot PC system unit.
  • Apricot monitor and accompanying User's Guide.
  • Windows 95 keyboard and two-button mouse.
  • System unit AC power cord, and monitor power cord, appropriate for the country of sale.
  • System documentation (this Owner's Handbook, etc.)
  • Microsoft Windows 95 or (if requested) Microsoft MS-DOS and Windows for Workgroups documentation.

Getting Started

  • Place the system unit flat on a sturdy, level surface, free from vibration.
  • Site the computer away from moisture, direct sunlight, and extremes of heat and cold.
  • When positioning the system unit, monitor and keyboard, take into account any local or national regulations relating to ergonomic requirements.
  • Give the computer plenty of room so that air can circulate on all sides.

Turning on and booting the computer

  • To turn on the computer, simply press the POWER button.
  • Always make sure that the system unit is turned on before turning on any attached peripherals.

Troubleshooting and error codes

Monitor No display
  • Check that the monitor is switched on.
  • Check that the monitor power cord is securely connected.
  • Check that the monitor signal cable is securely connected to the rear of the monitor and the system unit.
  • Check that the system unit is switched on.
  • Check that the AC power supply is switched on.
  • If the monitor is connected to an expansion card, check that it is correctly installed.
  • If the monitor is connected to the on-board video controller, check that it has not been disabled.
  • If the monitor still fails to display, contact your supplier or an authorised maintainer.
System unit Computer does not start when the POWER button is pressed
  • Check that the system unit power cord is securely connected.
  • Check that the AC power supply is switched on.
  • If your AC power outlets have switches, ensure they are in the On position.
Privacy Policy