Manual for C4

Loading the Camera: Unlock the back, remove it, turn the wind knob until it stops, then pull it up to release tension. Place the film cartridge in the compartment and thread the film under the friction roller, ensuring notches engage the sprocket. Wind the knob until it snaps down, then press the shutter release and wind again until the film end is against the sprocket. Replace the back, ensuring it's secured by the locking device. Set the exposure counter by pushing down the dial and turning it clockwise.Taking Pictures (SAFE method): Adjust Shutter (time), Aperture (light), Focusing (distance), and Exposure (taking the picture). For simple snapshots, use 'Color-matic' settings. Flash Photography: Attach the flash unit to the mounting bracket. Use the 'M' setting for medium peak flash lamps and the 'X' setting for fast peak flash lamps or electronic units. Refer to the Flash Exposure Guide for correct settings based on film type, lamp, and shutter speed.