Manual for VW202/VW222 Series

Name: Manual for VW202/VW222 Series
Brand: ASUS
Availability: InStock

Brand: ASUS

Category: Monitor

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 8:05 p.m.

Manual Publish Date: 2007-08-01

Warranty Information

Product warranty or service will not be extended if the product is repaired, modified, altered, or if the serial number is defaced or missing.

Setup: Assemble monitor base, adjust monitor angle, connect cables (Audio, Power, VGA/DVI), and turn on the monitor.
OSD Menu: Access the On-Screen Display (OSD) menu using the MENU button to reconfigure settings such as Splendid modes (Scenery, Standard, Theater, Game, Night View), Image adjustments (Brightness, Contrast, Sharpness, Saturation, Position, Focus), Color settings (Color Temp., Skin Tone), Input Select (VGA/DVI), and System Setup (Volume, OSD Setup, Language, Aspect Control, Information, Reset).
Troubleshooting: Addresses common issues like power LED not being on, no screen image, image too light/dark, centering/sizing problems, screen bouncing, color defects, blurriness, and sound issues. Solutions involve checking connections, adjusting settings via OSD, and performing auto-adjustments.

Troubleshooting and error codes

Problem	Possible Solution
Power LED is not ON	Press the button to check if the monitor is in the ON mode. Check if the power cord is properly connected to the monitor and the power outlet.
The power LED lights amber and there is no screen image	Check if the monitor and the computer are in the ON mode. Make sure the signal cable is properly connected the monitor and the computer. Inspect the signal cable and make sure none of the pins are bent. Connect the computer with another available monitor to check if the computer is properly working.
Screen image is too light or dark	Adjust the Contrast and Brightness settings via OSD.
Screen image is not centered or sized properly	Press the button for two seconds to automatically adjust the image. Adjust the H-Position or V-Position settings via OSD.
Screen image bounces or a wave pattern is present in the image	Make sure the signal cable is properly connected to the monitor and the computer. Move electrical devices that may cause electrical interference.
Screen image has color defects (white does not look white)	Inspect the signal cable and make sure that none of the pins are bent. Perform Reset via OSD. Adjust the R/G/B color settings or select the Color Temperature via OSD.
Screen image is blurry or fuzzy	Press the button for two seconds to automatically adjust the image (for VGA mode only). Adjust the Phase and Clock settings via OSD.
No sound or sound is low	Ensure that the audio cable is properly connected to the monitor and the computer Adjust the volume settings of both your monitor and computer. Ensure that the computer sound card driver is properly installed and activated.