Manual for P2 Series

Manual for P2 Series

Brand: ASUS

Category: Other

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 8:51 p.m.

Manual Publish Date: 2014-09-01

Warranty Information

Warranty and service are subject to specific conditions and may be voided by unauthorized repairs or missing serial numbers.

Operating your LED projector

This portable LED projector allows you to plug and play your devices so you can easily open multimedia files.

  1. Connect the LED projector to the power adapter: Connect the AC/DC power cord to the power adapter, connect the AC power cord to a power source, and then connect the DC power connector to your LED projector.
  2. Connect the LED projector to your device: Utilize various ports like Micro SD, USB 2.0, Micro USB, Audio output jack, Mini VGA, or HDMI/MHL to connect your input device.
  3. Adjust the height of the LED projector: Use the built-in stand to adjust the image height.
  4. Press the power button: Press the power button for approximately 2 seconds to turn on the projector.
  5. Adjust the image focus: Move the focus ring left or right to achieve a clear image.

Troubleshooting and error codes

Troubleshooting Possible Cause Solution
No image is displayed No signal Ensure the input device is connected and turned on. Press the Input button to select the correct input source.
Image is distorted Keystone effect Use the Keystone button to correct distorted images.
No sound Volume is low or muted Adjust the Volume. Ensure the audio output is correctly connected.
Privacy Policy