Manual for ZenBeam E2

Manual for ZenBeam E2

Brand: ASUS

Category: Other

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:58 p.m.

Warranty Information

ASUS provides a warranty with limitations on liability and product modification.

Connecting the Power Adapter: Plug the AC adapter into a 100V-240V power source and connect the DC connector to the LED projector. Charge the projector for 5 hours before first use in battery mode.
Connecting to Your Device: Use the audio output jack for headphones, HDMI port for video input, or the 5V/1A USB output port to charge mobile devices.
Powering On/Off: Long press the power button to turn the projector on or off. Short press to toggle power bank mode.
Adjusting Focus: Use the focus ring to achieve a clear image.
Portrait Mode: Rotate the projector for portrait viewing.
Screen Size and Projection Distance: Refer to the table for optimal placement.
Using the Wi-Fi Dongle: Insert the dongle and follow on-screen prompts for screen mirroring or casting.
Onscreen Display Menu: Press the Select button to access settings for volume, input, brightness, contrast, keystone, setup, and information.

Troubleshooting and error codes

Color Status
Solid Green The LED projector is plugged to a power source, running on battery mode and the battery power is more than 25%, or running in power bank mode.
Solid Red The LED projector is running on battery mode only and the battery power is not more than 25%.
Blinking Red The temperature of the LED projector is too high and will lower its brightness automatically. The LED projector will shut down if the temperature is still too high to prevent overheating.
Blinking Green The LED projector is currently used as a power bank and charging your mobile device.
Blinking Red and Green A system error occurred. The LED projector will shutdown automatically.
Privacy Policy