Brand: beko
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for DTC36610W
Uploaded: April 20, 2026, 7:51 p.m.
Warranty Information
The manufacturer/seller cannot be held liable if end-users do not comply with the provided instructions.
Loading the Dishwasher:
- Draw out lower and upper baskets, load dishes, and push back. Load lower basket first.
- Pour in detergent.
- Plug into socket and ensure water supply is on.
- Close door, press Power button.
- Choose a program and press Start/Pause to begin.
Adding a Forgotten Dish:
- Press Start/Pause to pause.
- Wait 5 seconds, then open door.
- Add forgotten dishes.
- Close door.
- Press Start/Pause after 10 seconds to resume.
Changing Program Mid-cycle:
- Press Start/Pause to pause.
- Press Program button for over 3 seconds to cancel.
- Press Program button to select new program.
- Press Start/Pause to start the new cycle.
Troubleshooting and error codes
| Codes | Meanings | Possible Causes |
|---|---|---|
| E1 | Longer inlet time. | Faucets is not opened, or water intake is restricted, or water pressure is too low. |
| E3 | Not reaching required temperature. | Malfunction of heating element. |
| E4 | Overflow. | Some element of dishwasher leaks. |
| E9 | Keep pressing a button more than 30 seconds. | Water or something on the button. |
| Ed | Failure of communication between main PCB with display PCB. | Open circuit or break wiring for the communication. |