Brand: BEKO
Category: Dryer
Document Type: Manual
Language: EN
Manual for BDP710W
Uploaded: Nov. 21, 2025, 9:22 p.m.
Warranty Information
Refer to the authorized service agent for any issues or replacements.
Basic Operation
1. Preparation: Ensure laundry is suitable for drying, separate items, and fasten zippers. For energy saving, spin laundry at high speed. Do not open the door unnecessarily during drying.
2. Program Selection: Use the On/Off/Program selection knob to choose a program. Press Start/Stand-by to begin.
3. Adding/Removing Laundry: You can add or remove laundry by pressing Start/Stand-by to pause, then opening the door. Remember this may increase drying time and energy consumption.
4. Child Lock: Activate by pressing Drying Level and Buzzer buttons simultaneously for 3 seconds. Deactivate the same way. Warning indicator lights up when active.
5. End of Program: Warning indicators for filter and water tank cleaning will illuminate. Turn the knob to Off to power down.
6. Troubleshooting: Consult the troubleshooting section for common issues like long drying times, damp clothes, or non-operation.
Troubleshooting and error codes
| Problem | Possible Cause and Solution |
|---|---|
| Drying operation takes too long. | Fibre filter pores might be clogged. >>> Wash the filter with warm water. Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter drawer. The condenser might be blocked. >>> Wash the condenser. Ventilation grills may be closed. >>> Remove obstructing objects. Ventilation may be inadequate. >>> Open doors/windows. Lime layer on humidity sensor. >>> Clean the humidity sensor. Excessive laundry loaded. >>> Do not load excessively. Laundry not wrung adequately. >>> Perform higher speed wringing. |
| Clothes come out damp after drying. | Program not suitable. >>> Check labels, select suitable program or use time programs. Fibre filter pores clogged. >>> Wash filter. Condenser blocked. >>> Wash condenser. Filter drawer clogged. >>> Clean filter drawer. Excessive laundry loaded. >>> Do not load excessively. Laundry not wrung adequately. >>> Perform higher speed wringing. |
| Drying machine does not turn on or program cannot be started. | Power plug unplugged. >>> Ensure plug is in. Loading door open. >>> Ensure door is closed. Program not set or Start/Stand-by not pressed. >>> Check settings. Child lock activated. >>> Turn off child lock. |
| Program terminated prematurely. | Loading door not closed completely. >>> Ensure door is closed. Power outage. >>> Press Start/Stand-by. Water tank full. >>> Empty water tank. Clothes shrunk, hardened, or spoiled. >>> Check labels, select suitable program. |
| Lighting not on. | Drying machine not turned on or program not selected. >>> Ensure machine is on. Lamp malfunctioning. >>> Contact Service Agent. |
| Filter cleaning warning symbol/LED is on/flashing. | Fibre filter not cleaned. >>> Clean filter. Filter slot clogged. >>> Clean filter slot. Fluff accumulated on lint filter pores. >>> Wash filter. Condenser blocked. >>> Wash condenser. |
| Water drips from the loading door. | Fibres on inner door surfaces or gasket. >>> Clean door surfaces and gasket. |
| Loading door opens by itself. | Loading door not closed completely. >>> Push until closing sound. |
| Water tank warning symbol/LED is on/flashing. | Water tank full. >>> Empty water tank. Water discharge hose collapsed. >>> Check hose. |
| Steam symbol is flashing. | Steam tank empty. >>> Fill steam tank with distilled/condensed water. |
| Steam programs do not start. | Steam tank empty. >>> Fill steam tank. |
| Wrinkles not removed with wrinkle removing program. | Excess laundry. >>> Place specified amount. Low steam application time selected. >>> Choose high steam program. Laundry stayed in machine too long. >>> Remove laundry promptly. |
| Laundry odour not lessened with odour removal program. | Excess laundry. >>> Place specified amount. Low steam application time selected. >>> Choose high steam program. |