Brand: beko
Category: Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DRYPOINT® RS 1300-6000 HP45
Uploaded: April 20, 2026, 8:05 p.m.
Warranty Information
Guarantee claims expire if the name plate is modified or removed.
This dryer is designed to separate moisture from compressed air. It operates automatically and requires minimal maintenance. Key steps include proper installation according to instructions, ensuring correct voltage and frequency, and maintaining specified pressure, temperature, and flow rates. The dryer is tested before delivery. Initial start-up requires qualified personnel. Regular checks and cleaning are necessary. The dryer should not be started more than six times per hour.
Troubleshooting and error codes
| Error Code | Description | Possible Cause | Remedy |
| A1 | Low pressure switch OPEN | System pressure too low | Check pressure supply |
| A2 | High pressure switch OPEN | System pressure too high | Check pressure supply; check for blockage |
| A3 | Compressor overload | Compressor too hot | Check ventilation; check ambient temperature |
| A4 | Fan overload (air-cooled) | Fan motor too hot | Check fan; check ambient temperature |
| A5 | Refrigerant leak detected | Refrigerant pressure too low | Contact service; check refrigerant level |
| A6 | Water cooler failure (water-cooled) | Water flow insufficient or too high temperature | Check water supply; check water temperature |
| A7 | Temperature sensor error | Sensor faulty | Contact service |
| A8 | Communication error | Control unit faulty | Contact service |