Brand: BEKO
Category: Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DRYPOINT® RS 25-1010 HP50
Uploaded: Nov. 21, 2025, 6:22 p.m.
Warranty Information
Guarantee claims expire if the name plate is modified or removed.
Basic Operation of the DRYPOINT® RS 25-1010 HP50 Dryer
This high-pressure compressed-air refrigeration dryer is designed to remove moisture from compressed air. It operates automatically after initial setup and requires minimal maintenance. Key operational aspects include:
- Installation: Ensure proper placement, ventilation, and electrical connections as per the manual.
- Start-up: Follow the initial start-up sequence carefully, ensuring all preliminary stages are complete.
- Operation: The dryer runs continuously during compressed air usage. It is crucial to maintain parameters within the nominal values specified on the name plate.
- Shutdown: Proper shutdown procedures are outlined to prevent potential damage, especially during short-term inactivity.
- Maintenance: Regular checks and cleaning are required for optimal performance and longevity.
Adherence to these instructions ensures reliable compressed-air drying.
Troubleshooting and error codes
| Trouble | Possible cause | Remedy |
|---|---|---|
| Dryer does not operate | No power supply | Check mains connection, fuses, and circuit breakers. |
| Dryer does not reach dew point | Incorrect operating parameters | Check inlet air pressure, temperature, and ambient temperature against name plate values. |
| Excessive noise | Loose components or fan issue | Check all fastenings and inspect the fan. |
| Water in compressed air | Faulty drain valve or filter | Check and clean the condensate drain and filter. |