Manual for DTBP 7001 W

Manual for DTBP 7001 W

Brand: beko

Category: Dryer

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 8:06 p.m.

Warranty Information

Your new product is guaranteed against breakdown repairs for twelve months from the date of original purchase.

Starting Your Dryer

  1. Plug in the drying machine.
  2. Open the loading door.
  3. Place laundry without jamming.
  4. Close the loading door.
  5. Select program using the On/Off/Programme selection knob.
  6. Press the Start/Stand-by button to begin.

Key Features & Functions

  • Programme Selection: Use the main knob to choose the desired drying program (e.g., Cotton Iron Dry, Synthetic Iron Dry, Sport, Freshen Up, Time Programmes).
  • Start/Pause: Initiates or pauses the selected program.
  • End Time: Allows you to delay the start of the program.
  • Child Lock: Prevents unintended interruption of the program.
  • Warning Indicators: Lights up for Filter Cleaning, Water Tank full, etc.

Maintenance

  • Regularly clean the lint filter and the loading door inner surface.
  • Clean the sensors periodically.
  • Drain the water tank after each drying cycle.
  • Clean the filter drawer and evaporator as instructed.

Troubleshooting and error codes

Problem Possible Cause Solution
Drying operation takes too long. Fibre filter pores might be clogged. Wash the filter with warm water.
Filter drawer might be clogged. (heat pump models) Clean the sponge and filter cloth in the filter drawer.
The condenser might be blocked. Wash the condenser.
Ventilation grills are closed. Remove any objects blocking the grills.
Inadequate ventilation in the room. Open the door or windows.
Lime layer on humidity sensor. Clean the humidity sensor.
Excessive amount of laundry loaded. Do not load excessively.
Laundry not wrung adequately. Perform higher speed wringing.
Clothes come out damp after drying. Program not suitable for laundry type. Check maintenance labels and select suitable program or use time programs.
Fibre filter pores clogged. Wash the filter with warm water.
Condenser blocked. Wash the condenser.
Filter drawer clogged. (heat pump models) Clean sponge and filter cloth in the filter drawer.
Excessive laundry load. Do not load excessively.
Laundry not wrung adequately. Perform higher speed wringing.
Dryer does not turn on or program cannot be started. Power plug unplugged. Ensure power cord is plugged in.
Loading door is open. Ensure loading door is properly closed.
Program not set or Start/Stand-by button not pressed. Check program is set and not in Stand-by.
Child lock activated. Turn off child lock.
Program terminated prematurely. Filter cleaning warning light on. Clean the filter.
Filter slot clogged. Clean the filter slot.
Fluff accumulation in lint filter pores. Wash the filter with warm water.
Condenser blocked. Wash the condenser.
Water drips from the loading door. Fibers on inner door surfaces. Clean inner surfaces of loading door and gasket.
Loading door opens by itself. Door not closed completely. Push door until closing sound is heard.
Water tank warning light on/flashing. Water tank is full. Empty the water tank.
Water discharge hose collapsed. Check discharge hose.
Steam symbol flashing. (Steam models) Steam tank empty. Fill the steam tank with distilled or condensed water.
Steam programs do not start. (Steam models) Steam tank empty. Fill the steam tank until the steam icon goes off.
Wrinkles not removed with wrinkle removal program. (Steam models) Excessive laundry load. Place specified amount of laundry.
Steam application time selected low. Choose program with high steam amount.
Laundry left in machine after program. Remove laundry promptly and hang to dry.
Laundry odour not lessened with odour removal program. (Steam models) Excessive laundry load. Place specified amount of laundry.
Steam application time selected low. Choose program with high steam amount.
Lighting inside dryer does not turn on. Lamp malfunctioning. Contact Authorized Service to replace lamp.
Privacy Policy