Manual for DTGC8000W

Manual for DTGC8000W

Brand: beko

Category: Dryer

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 7:51 p.m.

Warranty Information

Your new product is guaranteed against breakdown for twelve months from the date of original purchase.

Starting the Dryer:

  1. Plug in the dryer.
  2. Open the loading door.
  3. Place laundry inside without jamming.
  4. Close the loading door securely.
  5. Select the desired program using the On/Off/Program selection knob.
  6. Press the Start/Pause button to begin the drying cycle.

Important Notes:

  • Always check garment care labels before selecting a program.
  • Do not overload the dryer. Refer to the "Programme selection and consumption table" for capacity limits.
  • Clean the lint filter before or after each use.
  • Ensure adequate ventilation in the room where the dryer is operating.
  • Do not open the loading door during operation unless necessary.

End of Program:

  • When the program finishes, warning indicators for filter cleaning and water tank will illuminate.
  • Open the door to remove laundry.
  • Turn the dryer off using the On/Off/Program selection knob.
  • The "wrinkle prevention function" activates for 2 hours if laundry is left inside.

Troubleshooting and error codes

ProblemPossible Cause & Solution
Drying operation takes too long.Fibre filter pores clogged. Wash the filter with warm water. Filter drawer clogged (heat pump models). Clean sponge and filter cloth. Condenser blocked (condenser models). Wash the condenser. Ventilation grills closed. Remove objects blocking grills. Inadequate ventilation. Open door/windows. Lime layer on humidity sensor. Clean humidity sensor. Excessive laundry loaded. Do not overload. Laundry not wrung adequately. Perform higher speed wringing.
Clothes come out damp after drying.Program unsuitable for laundry type. Check labels and select appropriate program. Fibre filter pores clogged. Wash filter. Condenser blocked (condenser models). Wash condenser. Filter drawer clogged (heat pump models). Clean sponge and filter cloth. Excessive laundry loaded. Do not overload. Laundry not wrung adequately. Perform higher speed wringing.
Drying machine does not turn on or program cannot be started.Power plug unplugged. Ensure it is plugged in. Loading door open. Ensure it is properly closed. Program not set or Start/Stand-by not pressed. Check program is set and not in Stand-by. Child lock activated. Turn off child lock.
Program terminated prematurely for no reason.Loading door not closed completely. Ensure it is properly closed. Power outage. Press Start/Stand-by to restart. Water tank full. Empty water tank.
Clothes have shrunk, hardened or spoiled.Program unsuitable for laundry type. Check labels and select appropriate program.
The lighting inside the drying machine does not turn on. (For models with a lamp)Drying machine not turned on or program not selected. Ensure machine is on. Lamp malfunctioning. Contact Authorized Service.
Filter cleaning warning symbol/LED is on/flashing.Fibre filter not cleaned. Clean filter. Filter slot clogged. Clean filter slot. Fluff accumulated in filter pores. Wash filter with warm water. Condenser blocked. Wash condenser.
Water drips from the loading door.Fibres gathered on inner sides of loading door and gasket. Clean inner surfaces and gasket.
Loading door opens by itself.Loading door not closed completely. Push until closing sound is heard.
Water tank warning symbol / led is on/flashing.Water tank full. Empty water tank. Water discharge hose collapsed. Check hose if connected directly to drain.
Steam symbol is flashing. (For steam function models)Steam tank may be empty. Fill with distilled or condensed water.
Steam programs do not start. (For steam function models)Steam tank may be empty. Fill until steam icon goes off.
Wrinkles are not removed with wrinkle removing program. (For steam function models)Excessive laundry. Place specified amount. Steam application time too low. Choose program with high steam amount. Laundry left in machine too long after program. Remove laundry promptly.
Laundry odour not lessened with the odour removal program. (For odour removal program models)Excessive laundry. Place specified amount. Steam application time too low. Choose program with high steam amount.
Privacy Policy