Brand: BEKO
Category: Freezer
Document Type: Manual
Language: EN
Manual for FFP 1671 S
Uploaded: Nov. 21, 2025, 8:43 p.m.
Warranty Information
Your Beko product is guaranteed against breakdown repair for twelve months from the date of original purchase.
Before Operating:
- Ensure the appliance is level and the interior is dry.
- Plug into the wall socket. The green light will glow, and the compressor will start in about five minutes.
- For storing frozen food, ensure the fast-freeze mode is off and the temperature is -18°C or below.
- For freezing fresh food, set the thermostat to maximum, wait at least three hours before adding food.
- Front edges may feel warm; this is normal.
- Set thermostat to MIN initially and monitor temperature.
- If power fails, do not open the door; frozen food should be safe for up to 18 hours.
- The freezer door may be difficult to open immediately after closing due to pressure difference.
- The door open alarm will activate if the door is left ajar.
- Set the temperature using the control knob (1=Warmest, MAX=Coldest).
- Normal storage temperature should be -18°C (0°F).
- Check temperature with a thermometer periodically.
- Indicator lights show operating mode: Amber (fast freeze), Green (mains connected), Red (high temperature alarm).
- For freezing large amounts of fresh food, set control knob to MAX 24 hours prior.
- Make ice cubes by filling the ice tray and placing it in the freezer.
- The appliance defrosts automatically.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| If the appliance does not operate when switched on, check: | The plug is inserted properly in the socket and that the power supply is on. | (To check the power supply to the socket, plug in another appliance) |
| The fuse has blown/circuit breaker has tripped/main distribution switch has been turned off. | ||
| The temperature control has been set correctly. | ||
| New plug is wired correctly if you have changed the fitted moulded plug. |