Brand: BEKO
Category: Washing Machine
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 2820523348_EN
Uploaded: Nov. 21, 2025, 6:31 p.m.
Manual Publish Date: 2013-02-14
Warranty Information
Failure to follow the safety instructions in this manual shall void any warranty.
Operation Summary
This manual provides instructions for operating your Beko washing machine. It covers installation, preparation, program selection, and maintenance. Key operations include sorting laundry, preparing items, selecting the correct wash program based on fabric type and soiling level, adding detergent and softener, and starting the cycle. The control panel features a program selection knob, display, and buttons for delayed start, start/pause, auxiliary functions, spin speed, and temperature adjustment. It also details various programs like Cottons, Synthetics, BabyProtect, and specialized functions such as Quick Wash and Anti-Creasing. The manual emphasizes safety precautions throughout.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Programme cannot be started or selected. | Machine has switched to self-protection mode due to a supply problem. | Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. |
| Water in the machine. | Some water might have remained in the product due to quality control processes. | This is not a failure; water is not harmful to the machine. |
| Machine vibrates or makes noise. | Machine might be standing unbalanced. | Adjust the feet to level the machine. |
| A hard substance might have entered into the pump filter. | Clean the pump filter. | |
| Transportation safety bolts are not removed. | Remove the transportation safety bolts. | |
| Laundry quantity in the machine might be too little. | Add more laundry to the machine. | |
| Machine might be overloaded with laundry. | Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously. | |
| Machine might be leaning on a rigid item. | Make sure that the machine is not leaning on anything. | |
| Machine stopped shortly after the programme started. | Machine might have stopped temporarily due to low voltage. | It will resume running when the voltage restores to the normal level. |
| Programme time does not countdown. (On models with display) | Timer may stop during water intake. | Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this. |
| Timer may stop during heating step. | Timer indicator will not countdown until the machine reaches the selected temperature. | |
| Timer may stop during spinning step. | Automatic unbalanced load detection system might be activated due to unbalanced distribution of the laundry in the drum. | |
| Machine does not switch to spinning step when laundry is not evenly distributed. | Laundry should be rearranged and re-spun. | |
| Foam is overflowing from the detergent drawer. | Too much detergent is used. | Mix 1 tablespoonful softener and ½ I water and pour into the main wash compartment of the detergent drawer. |
| Use detergent suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. Reduce detergent when using additional chemicals. | ||
| Laundry remains wet at the end of the programme. | Excessive foam might have occurred. | Use recommended amount of detergent. |
| Machine does not switch to spinning step due to uneven distribution. | Laundry should be rearranged and re-spun. |