Brand: Bennett Read
Category: Pressure Cooker
Document Type:
Language: EN
Brand: Bennett Read
Category: Pressure Cooker
Document Type:
Language: EN
Uploaded: April 8, 2025, 1:50 p.m.
Warranty Summary
Basic Operation Summary:
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Difficult to close the lid | The lid seal ring is not in place. | Put the lid seal ring correctly in place. |
| The float valve has jammed the push rod. | Gently push the rod with your hand. | |
| Difficult to open the lid | The float valve does not drop down after the steam and pressure has been vented/ released. | Gently lift up the float valve using chopsticks to release steam until the float valve drops, then turn the lid to open it. |
| Steam leaking around the lid | Lid seal ring has not been put on to the lid or has not been placed correctly. | Place the lid seal ring correctly on to the lid. |
| Food is stuck in the lid seal ring. | Clean the lid seal ring. | |
| Damaged or worn lid seal ring. | Replace the lid seal ring. See page 16 for contact details. | |
| The lid is not properly secured. | Check that the lid is secured according to the directions. | |
| Steam leaking around the float valve | Food stuck in the seal ring of the float valve. | Clean the seal ring of the float valve. |
| The seal ring of the float valve is worn out. | Replace the seal ring of the float valve. See page 17 for contact details. | |
| The float valve will not rise | Too little food and water inside the removable inner pot | Add food and water according to the directions. |
| Leakage around the lid or the pressure limiting safety valve. | Send to an authorized Tevo repair centre. See page 17 for contact details. | |
| The pressure limiting safety valve is not in the PRESSURE position. | Correct its position. |