Brand: beurer
Category: Blood Pressure Monitor
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for BC 30
Uploaded: April 20, 2026, 7:59 p.m.
Warranty Information
Beurer BC 30 wrist blood pressure monitor comes with a 2-year warranty against manufacturing defects.
Getting Started:
- Insert batteries (2x AAA alkaline).
- Set date and time using the +/-/C buttons.
Measuring Blood Pressure:
- Ensure correct cuff size and proper wrist circumference.
- Sit or lie down, keeping the cuff at heart level.
- Rest for 5 minutes before measurement.
- Attach cuff to bare wrist, inside, 1 cm below hand.
- Fasten snugly, not restricting blood flow.
- Press START/STOP to begin measurement.
- Remain still and do not talk during measurement.
- View results (pulse, systolic, diastolic) on the display.
- Device automatically switches off after 2 minutes. Wait 5 minutes before next measurement.
Saving Measurements:
- Measurements are saved automatically with date and time.
- Two user memories are available, each storing 60 measurements.
Error Messages:
- Error messages (E1-E6) indicate issues like no pulse, movement, incorrect cuff tension, pump pressure, or low batteries. Repeat measurement or check batteries.
Troubleshooting and error codes
| Error Message | Possible Cause | Solution |
|---|---|---|
| E1 | Pulse could not be recorded | Repeat measurement, ensure no movement or talking. |
| E2 | Movement or speaking during measurement | Repeat measurement, ensure no movement or talking. |
| E3 | Cuff fastened too tightly or loosely | Adjust cuff tension and repeat measurement. |
| E4 | Errors occurred during measurement | Repeat measurement. |
| E5 | Inflation pressure higher than 300 mmHg | Repeat measurement. |
| E6 | Batteries almost empty | Reinsert or replace batteries. |