Brand: BLACK & DECKER
Category: Refrigerator
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for BRF1600GIM/BRF1800GIM
Uploaded: April 20, 2026, 7:48 p.m.
Warranty Information
One year limited warranty for parts and labor, followed by four years for specific component parts only.
Installation: Unpack refrigerator, clean, and place on a flat, solid surface. Ensure proper ventilation with recommended clearances. Level the unit using adjustable feet. Connect to a grounded power outlet. For ice maker, connect to a potable cold water supply line.
Operation: Set refrigerator and freezer temperatures using the 'Fridge' and 'Freezer' buttons. Utilize 'Select' button for 'Quick Freezing' or 'Smart' modes. Adjust humidity control in the crisper. The ice maker will start producing ice within 12-24 hours after connection.
Troubleshooting and error codes
| TROUBLE | POSSIBLE CAUSE | POSSIBLE REMEDY |
| Refrigerator does not work. | A. Unit is not plugged in or is loose. B. Fuse has blown or is defective. C. Wall power socket is defective. |
A. Plug in the refrigerator. B. Check fuse, replace if necessary. C. To be corrected by a qualified electrician. |
| The food is too cold. | A. Temperature is not properly adjusted. | A. Set the temperature control dial to a warmer setting. |
| The food is too warm | A. Temperature is not properly adjusted. B. Door was open for an extended period. C. A large quantity of warm food was placed in the refrigerator within the last 24 hours. D. The refrigerator is near a heat source. |
A. Set the temperature control dial to a cooler setting. B. Open the door only as long as necessary. Check door gasket for proper seal. C. Set the temperature control dial to a colder setting temporarily. D. Please look in the "Protection From Heat and Moisture" section. |
| Heavy build-up of frost, possibly also on the door seal. NOTE: This is normal during high humidity periods. Frequent door openings will also cause heavy frost buildup. | A. Door seal is not air-tight. | A. Carefully warm the leaking sections of the door gasket with a hair dryer (on a cool setting). At the same time, shape the warmed door seal by hand such that it sits correctly. |
| Popping or cracking sounds. | A. When compressor comes on. | A. This is a normal sound of coolant flowing through condenser coils. |
| Refrigerator door does not shut properly. | A. The refrigerator door is not properly aligned. B. Possible blockage from food containers, shelves, bins, etc.. |
A. Re-align the refrigerator door. Refer to the "Door Alignment" section. B. Ensure nothing is blocking the door. |
| Refrigerator has an odor. | A. Foods not properly sealed. B. Interior needs cleaning. |
A. Removed any contaminated foods. B. Please refer to "Cleaning and Care" section. |