Manual for SV1000

Manual for SV1000

Brand: BLACK & DECKER

Category: Vacuum Cleaners

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:56 p.m.

Warranty Information

This product is warranted for two years against defects in material or workmanship.

Filling the Water Tank: Push the tank release button and rotate the tank down and away. Remove the filler cap, fill the tank, and reattach by locating the lower tab and rotating until it clicks.

Operation: Slide the switch to select desired function (vac, steam, or spray). For spills, vacuum liquids first. For stains, use steam or spray, then vacuum. Always test a small area for colorfastness. Keep hair, clothing, and body parts away from moving parts. Do not add cleaning products to the tank.

Emptying Dirt Bowl: Depress the bowl release button and slide the bowl forward. Lift the bowl assembly out, remove the filter and deflector. Empty and wash the bowl, filter, and deflector if necessary. Ensure all parts are dry before reassembly.

Storage: Wrap the cord around the unit and store in a clean, dry location. Do not store where it can freeze.

Troubleshooting and error codes

Problem Possible Cause Solution
Unit will not operate. Unit is not plugged in. Plug unit into a properly grounded outlet.
Cord or plug is damaged. Return appliance to authorized service facility.
No suction. Dirt bowl is full. Empty dirt bowl.
Filter is clogged or dirty. Clean or replace filter.
No steam or spray. Water tank is empty. Fill water tank.
Unit is not switched to steam or spray position. Move switch to desired position.
Air lock in pump. Switch to steam/spray position and allow to run for a few seconds until steam appears.
Liquid leaks from unit. Unit is not held correctly. Use unit with nose downwards. Do not operate on its side.
Dirt bowl is overfilled. Do not overfill dirt bowl.
Privacy Policy