Brand: BOSCH
Category: Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Vision 300/500/800 Series
Uploaded: Nov. 21, 2025, 8:23 p.m.
Manual Publish Date: 2009-06-01
Warranty Information
Bosch warrants the Product against defects in materials or workmanship for 365 days from the date of purchase.
Using the Dryer
1. Open the dryer door.
2. Check the lint filter. Clean if necessary.
3. Select a drying cycle using the Cycle Selector, matching it to your laundry type.
4. Optionally, select additional options like Delicates or ECO Action.
5. Load the dryer with laundry, ensuring items are not overcrowded and do not touch the drum seal.
6. Close the door securely.
7. Press the Start/Pause button to begin the cycle. The Start/Pause indicator light will illuminate.
8. When the cycle is finished, open the door and remove the laundry promptly.
9. The Wrinkle Block® feature will tumble clothes for up to an hour after the cycle ends to prevent creasing.
Troubleshooting and error codes
| Problem | Possible Cause | Remedy |
|---|---|---|
| Dryer does not start. "Start/Stop" indicator light does not illuminate. | Plug is not connected or incorrectly connected. | Connect the plug correctly. |
| The cycle has been interrupted. A warning signal sounds and the display shows "CLn". | The lint filter is dirty. | Clean the lint filter as described on page 61. |
| The cycle has been interrupted. A warning signal sounds and the display shows "E:12". | The exhaust air duct is blocked or too long. | Clean the exhaust air duct. Reduce the exhaust duct length to its maximum length as described on page 51. |
| The desired dryness level has not been achieved or the drying time is too long. Display indicates "E:03". | The ambient temperature is below 41°F/5°C. | Increase the ambient temperature. |
| The "Start/Stop" indicator light does not illuminate. | No program was selected. | Select a program. |
| No water is sprayed during the Steam cycles. | The water tap(s) are not open. | Open the water tap(s). |