Brand: BOSCH
Category: Lawn Mower
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Indego M 700 | Indego M+ 700
Uploaded: Nov. 21, 2025, 6:51 p.m.
Manual Publish Date: 2020-04-15
Warranty Information
Bosch provides a 24-month warranty for the Indego Robotic Mower.
Operating the Indego Mower
Before any work on the mower (maintenance, tool changes, transport, storage), switch it off using the isolator switch. Children must be supervised to prevent them from playing with the machine. Always wear substantial footwear and long trousers. Operate only with the battery compartment closed and securely fastened. Avoid mowing in bad weather, especially during thunderstorms. Maintain balance, especially on slopes and wet grass. Do not overreach; operate carefully and without haste. Users are responsible for accidents or damage to others or their property. Immediately press the red STOP button in case of hazards. Ensure correct perimeter wire installation. Periodically inspect the mowing area for stones, sticks, and wires. Thoroughly inspect the area for wild animals and pets before operation. Do not run live mains cables in the working area. Periodically inspect blades, bolts, and cutters for wear or damage; replace as a set. Never operate with defective guards or safety devices. Do not put hands or feet near rotating parts. Never pick up or carry the machine while the motor is running. Do not leave the machine unattended if pets, children, or people are nearby. Start the machine from a safe distance. Do not use simultaneously with a sprinkler. If submerged, turn off and contact Bosch Service Centre. Do not modify the product. Unauthorized modifications can impair safety and increase noise/vibration.
Troubleshooting and error codes
| Symptom | Possible Cause | Remedy |
|---|---|---|
| LED on charging station flashes | Boundary wire interrupted, too long or too short. Wire not connected and mower not in charging station. | Check boundary wire for correct length (20-350 m). Reconnect power. Follow installation guide. |
| Strong vibrations/noises | Loose blade screw | Tighten blade screw to 2.5 Nm. |
| Damaged/bent blade | Replace blade (see figure J). | |
| Mower does not drive into charging station correctly | Boundary wire not correctly laid around charging station | Follow installation guide for laying boundary wire. |
| Boundary wire near interference source | Remove excess wire near charging station. Change wire ID in menu. | |
| Mower does not run | Isolator switch not switched on | Remove mower from charging station, switch on isolator switch, and place mower back in charging station. |
| Possible blockage | Always switch off isolator switch first. Check area under mower. Remove blockages (wear gloves). | |
| Battery not fully charged | Place mower in charging station to enable charging. Charging station must be switched on. | |
| Mower not charging | Battery too cold/too hot | Mower operates between 5°C and 45°C. Allow battery to cool/warm up. If issue persists, place charging station in shade. |
| Mower operates with display off | Battery too cold/too hot | Allow battery to cool/warm up. If issue persists, place charging station in shade. |
| Problem in operation | Press confirmation button to illuminate display or place mower in charging station. | |
| Mower without charging function | Charging contacts corroded | Clean charging contacts. |
| Battery not inserted, inserted incorrectly, or wrong battery for mower | Insert battery correctly (see figure L). Use correct Bosch battery. | |
| Mower outside boundary wire | Boundary wire on a slope | Maintain 30 cm distance between boundary wire and slope. |
| Obstacle near wire | Remove obstacle. | |
| Parts of lawn not mown | Mower needs more time to finish garden | Allow mower to complete 3 full mowing cycles. |
| Time window too small for lawn size | Increase mowing time window or use "Bosch AUTO" calendar function. |