Installation Guide for KGS36N00

Installation

• Install the combined freezer-refrigerator in a dry, well-ventilated room to prevent condensation.
• Maintain minimum lateral clearances from heat sources or other refrigerators: 3 cm (electric cookers), 30 cm (oil/coal-fired cookers), 2 cm (other refrigerators).
• Ensure unimpeded airflow at the back by not blocking ventilation openings.
• The appliance must stand firm and level, using adjustable feet at the front. Rollers facilitate positioning.
• If the door opens towards a side wall, leave a 12 mm gap to allow drawer removal.

Electrical Connection

• Connect to a 220-240 V AC (50Hz) supply, protected by a 13 Amp fuse. Use a properly installed socket with earthing contact.

Changing the Opening Direction of the Doors

• Disconnect the appliance from the mains before starting.
• Lay the refrigerator on its back.
• Follow the detailed steps to unscrew hinges, remove doors, transfer parts to the opposite side, and reassemble.
• Refer to Figure 2 for visual guidance.
• After changing the handle position, place the plastic cover in the empty hole.
• Important: Let the fridge-freezer stand still for at least two hours before turning it back on.