Manual for DW45BI

Starting the Appliance

Turn on the water, partially open the door, and press the ON-OFF button 'C'. The 'D' indicator light will come on. Choose the desired cycle using the 'E' button. Close the door. A short acoustic signal indicates the cycle has begun. The end of the cycle is signaled by a double acoustic sound and blinking indicator light 'A'. Open the door, turn off the appliance, and turn off the water supply.

Starting a Wash Cycle

Press the cycle selection button 'E' to choose a wash cycle. Close the door. The appliance will signal the start with an acoustic sound.

Cancelling or Modifying a Cycle

Open the door and press the ON-OFF button 'C'. Follow instructions for 'Setting and Starting a Wash Cycle'.

Setting the Start Delay Time

Press the 'I' button to delay the start time by 2, 4, or 6 hours. The 'H' light indicates the delay. The cycle will start after the delay period.

If You Forget to Load Some Dishes

Open the door carefully to interrupt the cycle. Close the door to restart at the point where it left off.

1/2 Load Button

Use the 'B' button to wash dishes using only the upper rack for smaller loads.