Brand: Braun
Category: Trail Camera
Document Type:
Language: EN
Manual for BLACK700
Uploaded: Aug. 9, 2025, 11:46 p.m.
Manual Publish Date: 2019
Warranty Information
BRAUN Photo Technik GmbH provides a 24-month warranty for this product.
Getting Started: Insert batteries (6x AA) and a Micro SD card. Use the remote to power on and navigate menus.
Modes:
Test Mode: Screen is on, use remote for settings, photos, or videos.
On Mode: Screen is off, camera operates automatically, triggered by PIR motion detection.
Menu Navigation: Use remote buttons (Up/Down/Left/Right/OK/Shoot) to select modes, adjust settings like resolution, video length, and motion detection sensitivity.
Firmware Update: Download update file, copy to Micro SD card, insert into camera, and power on in Test mode.
Modes:
Test Mode: Screen is on, use remote for settings, photos, or videos.
On Mode: Screen is off, camera operates automatically, triggered by PIR motion detection.
Menu Navigation: Use remote buttons (Up/Down/Left/Right/OK/Shoot) to select modes, adjust settings like resolution, video length, and motion detection sensitivity.
Firmware Update: Download update file, copy to Micro SD card, insert into camera, and power on in Test mode.
Troubleshooting and error codes
| Issue | Solution |
|---|---|
| Camera not turning on | Check battery insertion and charge level. |
| SD card not recognized | Ensure card is inserted correctly and formatted. |
| Blurry images | Clean the lens. Adjust PIR sensitivity if needed. |
| No motion detection | Check PIR sensor and ensure camera is in ON mode. Increase PIR sensitivity. |
| Firmware update failed | Ensure battery has sufficient charge and the correct firmware file is used. |